Building Science and HVAC Systems: Meeting the Competency Requirements of AIHA Guideline 3 – 2004, Assessment, Remediation, and Post-Remediation Verification of Mold in Buildings

This course is intended to address and provide competency in Areas 5 and 6 of AIHA Guideline 3. This course DOES NOT discuss the etiology of mold, sampling for mold, or interpreting sampling results for mold. It is a building science/HVAC course.

3.0 IH CM Points/2.4 CEUs/2.4 COCs

November 7-9

Atrium Suites
4255 S. Paradise Road
Las Vegas, NV  89109
Reservations 866404-5286; Hotel Direct 702- 369-4400
Room Rate:  $109
www.atriumsuiteshotel.com

Who Needs to Attend

• Industrial hygienists
• Facility managers and designers
• Anyone who is concerned about IAQ, with special emphasis on moisture and moisture-related problems

Why You Need to Attend

Excellent reference materials
Problem-solving exercises
Professional instructors sharing real-life experiences
Shared problems with course participants and instructors
Certificate of Completion

Day 1—November 7, 2007: Building Science
“Building Moisture, Mold, and the Science within the Building Envelope”

Instructor

Michael Geyer, PE, CIH, CSP

Description 

A thorough discussion of the functional elements that make up the building envelope, the science and theory within the envelope, and the forces acting upon the envelope. This discussion is applicable to those assessing buildings for molds, IAQ problems, and general sick-building investigations.  A building envelope is described in its three basic elements, each constructed differently to provide structural support, maintain thermal performance, and shed moisture.  Moisture loads acting upon the envelope will be discussed, including: uncontrolled, controlled, induced, occupants, etc.  Building materials, building methods, building assemblies and engineered systems will be discussed as applicable to moisture control and management.  Many photographs and drawings of buildings, building systems and architectural elements, contributing to or resisting moisture, support this discussion.

Day 1 Learning Outcomes

Upon completion, participants will be able to:

•  Discuss the science of the building envelope.
•  Recognize the theory and practice of managing building moisture.
•  Identify weaknesses in suspect envelope assemblies.
•  Differentiate moisture sources and prepare corrective actions.
•  Assess building material strength and weaknesses, & choose appropriately.
•  Comment on building designs to minimize moisture risks in new and existing construction.

Day 1 Course Materials

Each student receives a two volume handout, including copies of photographs and diagrams used by the instructor.

Day 1 Course Outline

• What is a building and dynamic forces on a building envelope.
• Architectural elements and materials
• Uncontrollable sources of moisture.
• Moisture penetration in foundation, wall, and roof elements.
• Controllable sources of moisture.
• Building mechanical systems.
• Induced moisture loads ­ occupants, landscaping, and drainage
• Special use facilities - Schools, prisons, health care & animal facilities

Days 2 and 3—November 8-9, 2007:  HVAC Systems“HVAC Systems: Design, Troubleshooting, O&M and Testing”

Course Instructor

D. Jeff Burton, CIH, PE
 
Description 

This two-day module provides practical information on HVAC systems and equipment, how they  work, and how to recognize and test for HVAC-related problems that can lead to IAQ  problems such as mold growth. The module also covers basic psychrometrics, air behavior, current and relevant standards and guidelines of good  practice, system testing, system cleaning, and the avoidance/control of mold  and related problems in HVAC systems.
 
Days 2-3 Learning Outcomes 

Upon completion, participants will be able to:

• Characterize HVAC systems and equipment
• Read HVAC plans and specifications and relate specific equipment to mold control
• Use and follow appropriate guidelines, standards and codes
• Describe the impact of air temperature, humidity and filtration on mold and microbiological growth in HVAC systems
• Develop ductwork and system component cleaning and control criteria and programs
• Determine the amounts of total and outdoor air being delivered to an occupied space for dilution and control of air contaminants, e.g., mold spores and microbiological related odors
• Perform simple diagnostic inspection and testing of HVAC system component performance
• Assist in litigation and remediation activities

Days 2-3 Course Materials

Each participant receives the latest version of D. Jeff Burton's IAQ and HVAC Workbook. Additionally, each participant receives a CD-ROM with course PowerPoint presentations, handouts, and supplementary information.
 
Days 2-3 Outline
 
Thursday, November 8, 2007 - Foundations
 
  1         Introduction and overview
 2-3        Fundamentals of HVAC system design, operation and control
 4-5        Air and water vapor behavior in HVAC Systems
  6           Standards, Guidelines and Codes
  7           Case Studies Workshop No. 1
 
Friday, November 9, 2007 - Practical Apps and Control
 
 1        Dilution ventilation control of aerosols, spores, odors
 2        Reading and using HVAC plans and specifications
 3-4       HVAC diagnostics, testing and troubleshooting
 5-6       Control of moisture, organic contaminants, mold and related  problems in HVAC systems
 7        Case Studies Workshop No. 2
 
Accommodations and Transportation Information

Please reserve your room as soon as possible as a limited number of rooms are blocked at each location. Room blocks expire 30 days prior to the course start date; after this date, rooms will be subject to the regular rate and availability. When making room reservations, please mention AIHA to receive a reduced rate. 

Attendees are responsible for making their own travel arrangements. If you would like assistance in making your arrangements, contact Association Travel Concepts (ATC), AIHA's official travel agency, at (800) 458-9383, 9:00 a.m.-9:00 p.m. EST, Monday through Friday, or e-mail your requests to reservations@ATCMeetings.com.  AIHA reserves the right to cancel a course 30 days prior to the start of the course, therefore, we suggest that you do not purchase nonrefundable tickets until 3 weeks prior to the start of the course.

Transfers, Substitutions, and Cancellations

All transfers, cancellations, and/or substitutions must be received in writing by the Continuing Education Department. Transfers can be made at any time to any course within the same calendar year. Substitutions may be made at any time. Cancellations made 15 business days prior to the course will be given a full refund. Cancellations made within 15 days of the course will be charged a $75 processing fee. No refunds will be given if notice of cancellation is not received prior to the start of the course, including no-shows.

Pricing

Early Registration

AIHA Member $895
Nonmember $1,025

Price Regular Registration

AIHA Member $1,020
Nonmember $1,150

Registration/Questions

Call: (703) 849-8888
 
Mail or fax registration form:     

     Download a Registration Form Here 

Send Check to: 

AIHA 
P.O. Box 34796
Alexandria, VA 22334-0796 

Fax: (703) 207-3561 

 E-mail: infonet@aiha.org