Education Program
   
   
   
   
   
   
   

 

AIHce Home Page
  AIHA
  ACGIH

 


Monday, May 23
Technical Sessions

OPENING
GENERAL
SESSION

The Future of the Workforce in the Global Economy

Dr. James Canton

8:00 a.m.–9:30 a.m.

Dr. James Canton, chairman and CEO, Institute for Global Futures, San Francisco, CA

Dr. James Canton is a renowned global futurist, author, and consultant. For the past 25 years, he has been insightfully forecasting the impact of future trends and innovations on organizations and society.

Dr. Canton advises Fortune 1000 corporations and governments worldwide. He has also served as an advisor to the White House Office of Science and Technology; is on the advisory board of MIT’s Media Lab, Europe; and advises the National Science Foundation.

A frequent guest of the media worldwide, Dr. Canton has served as a commentator on CNN, receiving coverage about his vision for the future in the Wall Street Journal, New York Times, US News and World Report, and other well-known publications.

The author of Technofutures, a book acclaimed as a blueprint for how innovation will shape the 21st century, Dr. Canton will apply his fascinating forecasts of trends and breakthroughs to those that will shape the workforce and OEHS profession.

Dr. Canton will host a book signing at AIHA booth #245 after the opening session.

 

LECTURE

Fifth Annual Upton Sinclair Memorial Lecture for Outstanding EH&S Investigative Reporting

10:30 a.m.–11:30 a.m.

Arranger: S. Schneider, Laborers Health and Safety Fund of North America, Washington, DC. Moderator: S. Schneider, Laborers Health and Safety Fund of North America, Washington, DC. Monitors: W. Cameron, Center to Protect Workers' Rights, Seattle, WA.; M. Vela Acosta, University of Texas, Brownsville, TX.

Chemical Controversies: Deceit and Denial and the Politics of Industrial Pollution

Presenters:

David Rosner, Ph.D.,
Columbia University,
New York, NY
Gerald Markowitz, Ph.D.,
John Jay College and CUNY Graduate Center, New York, NY

The book "Deceit and Denial: The Deadly Politics of Industrial Pollution" looked at questions regarding how he lead industry and the chemical industry reacted when faced with information regarding the potential dangers of their products to human health during the twentieth century. The book, and the authors, have become embroiled in the legal disputes surrounding cases in which these documents have appeared. Various chemical companies, specifically those who produce vinyl chloride, are being sued by workers who have developed a very rare cancer called angiosarcoma of the liver. Significantly, this cancer is closely associated with exposure to vinyl chloride monomer the chemical building block of polyvinyl chloride.

Recently, Monsanto, Airco, Dow, Union Carbide, Goodyear, Goodrich, and Shell, among other large corporations, have subpoenaed the press, the foundation that supported the work behind the book, and five of the eight outside peer reviewers who were asked by the publisher to evaluate the book before acceptance for publication. In addition, the corporations hired a professor to attack two of the chapters in the book and to challenge the professional standards, ethics, and integrity of its authors. The events are fully chronicled at: www.deceitanddenial.org. This presentation will review the events of the past few months.

This lecture is given each year in honor of Upton Sinclair, an investigative journalist who uncovered the dangers of the meat packing business 100 years ago in his book "The Jungle." This lecture is sponsored by the AIHA Social Concerns Committee.

CR
301

How to Understand and Develop an Effective Safety Program for Your Spanish-Speaking Workforce

EHS CROSSOVER PROGRAM  301
10:30 a.m.–Noon

Moderator: K. Blondin, General Service Administration, Washington, DC. Monitors: B. Howell, Defense Supply Center Richmond, Richmond, VA; E. Clas, Clas Consulting LLC, Norfolk, MA. Presenters: H. Escarcega, Bilingual Solutions Int'l, Los Angeles, CA. and D. Armstrong, New Dawn Consulting, Santa Barbara, Santa Barbara, CA.

Mr. Escarcega
This presentation will review the current issues and challenges facing environmental health and safety professionals who work with today's Spanish-speaking workforce. EH&S statistics indicate that this ethnic group has the highest fatality rate. We will focus on communication and training tips and techniques which address the cultural and language barriers. We'll review tips for building a training classroom environment conducive to participation. Ultimately, the goal is a reduction in injuries, accidents, and fatalities through appropriate communication and training

Presentation Objections:

  • Learn Tips and Techniques for Communicating and Training Your Spanish-Speaking Workforce
  • Learn to understand Latino values, traditions, and culture and their influence in the workplace
  • Improve your communication skills and ability to coach, train and empower your Latino workforce

Ms. Armstrong
Find out how a bilingual injury reduction program can reduce lost work days and raised morale.

Key Topics:

  • Making a big impact with a limited budget

  • How to be a change agent

  • Marketing a safety program for maximum buy-in

  • Taking advantage of workers compensation reforms

  • Creating an bilingual safety program

  • Overcoming bilingual safety challenges

  • Celebrating success through teamwork!

Presentation Objectives:

  • Creating a low budget bilingual safety training program
  • Creating bilingual accident injury prevention and health and wellness program
  • Overcoming multi-cultural safety challenges

CR
302

Implementation of Successful Owner Controlled Insurance Program for Construction Activities

EHS CROSSOVER PROGRAM  302
10:30 a.m.–Noon

Moderator: K. Lavaty, AMEC Earth and Environmental, Portland, OR. Monitor:  J. Lewis, Maryland Department of the Environment, Baltimore, MD; C. Nichelson, S.M. Stoller Corporation, Idaho Falls, ID. Presenters: R. Burnis, Mercedes-Benz U.S. International, Vance, AL; B. Lingo, Hilb Rogal and Hobbs,  Birmingham, AL.

Developing a successful owner controlled insurance program for construction projects can pose special challenges due to workforce variability. When safety audits and job safety analysis programs are integrated with an observation safety program, a successful safety program can be implemented to reduce injuries and provide stepping stones to a successful OCIP program―resulting in savings well in excess of the national average. This presentation will focus on the steps necessary to implement and conclude a successful OCIP program.

Presentation Objectives:

  • Steps to establish an effective OCIP project
  • Method to establish an observation safety program
  • How to implement a successful follow up process

CR
303

Managing Ergonomic Risk in Lean Manufacturing

EHS CROSSOVER PROGRAM   303
10:30 a.m.–Noon

Moderator: J. Maslowski, The Canadian Science Centre for Human and Animal Health, Winnipeg, MB, Canada. Monitor: E. Wilson, Birds Eye Foods, Fulton, NY. Speaker: J. Kester, R. Wilson, Marsh USA, Inc., Chicago, IL.

Recent studies show that increasing workers' compensation cost trends as manufacturers implement lean manufacturing concepts. Learn why musculoskeletal disorders seem to proliferate in the lean environment and how to manage these costs by integrating ergonomics into the lean process. This presentation uses prominent research and case studies to illustrate the total financial impact of lean concepts and what leading manufacturers have done to adjust their lean processes to reduce MSD incidence rates while achieving their lean efficiencies.

Presentation Objectives:

  • Discuss the impact on lean manufacturing on workers' compensation costs
  • Define strategies for integrating ergonomics into lean manufacturing processes
  • Present tactics for selling ergonomics to operations managers and lean manufacturing proponents

CR
304

Fall Protection Legal Issues for Multi-Employers and Their Subcontractors

EHS CROSSOVER PROGRAM  304
10:30 a.m.–Noon

Moderator: A. Lewis, Coastal Training Technologies, Virginia Beach, VA. Monitors: H. Hobbs, Georgia Power Company, Atlanta, GA; D. Friedman, SAIF Corporation, Salem, OR. Presenters: M. Wright, Safety through Engineering, New Carlisle, OH; T. Green, Green & Green, Lawyers, Dayton, OH.

Address legal implications of fall protection multi-employer issues for general industry and owners with on-site contractors. Case study outlines criteria that must be present in your fall protection safety program in order to avoid willful violations. We will explore multi-employer issues for a construction project of a multi-story structure involving concrete walls, steel framing, steel decking, and an underground parking garage. Session will address the three tiers of the multi-employer policy, fall protection requirements, and how to avoid citations.

Presentation Objectives:

  • Identify fall protection safety responsibilities for: Tier 1—General Contractor, Tier 2—Subcontractor, Tier 3—Subcontractor to Subcontractor
  • Identify the need to demonstrate, on drawings, how to construct buildings in a safe, logical manner
  • Identify fall protection requirements for design, bid and construction documents.

CR
305

A NIOSH Recognized Model: Bridging the Gap Between Occupational and Non-Occupational Medicine Practices to Improve Employee Health

EHS CROSSOVER PROGRAM  305
10:30 a.m.–Noon

Moderator: O. Douglass, Weston Solutions, Inc. West Chester, PA. Monitors: A. Amendola, NIOSH, Morgantown, WV; J. Unmack, Unmack Corp., Rancho Palos Verdes, CA. Presenter: P. Greaney, WorkCare, Orange, CA

Employers have made progress in preventing work-related illness/injury and disability by promoting personal health responsibility. Despite this success, there has been a disconnect between occupational and non-occupational health initiatives, as progress in the area of workplace health/safety and personal wellness has been achieved independently. To bridge this disconnect, employers are using a synergistic approach that uses the worksite as an axis to promote health, safety, and well being across the work-life continuum. This model was recognized by NIOSH in 2004.

Presentation Objectives:

  • How OCC and non-OCC case management practices support EHS initiatives
  • Identify current models recognized by NIOSH
  • Describe methods of case management integration to promote health/safety

SPECIAL

ASK THE EXPERT

John Howard, M.D., Director, NIOSH10:30a.m.–Noon

John Howard, M.D., Director, NIOSH

Moderator: R. Soule, Indiana University of Pennsylvania, Indiana, PA. Monitors: L. Lowry, University of Texas Health Center at Tyler, Tyler, TX; J. Maslowski, The Canadian Science Centre for Human and Animal H, Winnipeg, MB, Canada.

Join Dr. Howard in this new, interactive program. After a brief introduction, the content of this session is 95 percent Q&A. The session moderator will facilitate the flow of questions to Dr. Howard as participants use the audience microphones. Learn the answers to your questions and hear those of others who attend this session.

PO
101

Bioaerosols and Biosafety/Biotechnology

PODIUM 101
10:30 a.m.–12:30 p.m.

Arranger: D. Sassone, Los Alamos National Laboratory, Los Alamos, NM. Moderator: D. Sassone, Los Alamos National Laboratory, Los Alamos, NM. Monitors: P. Dulaney, Applied Environmental Inc, Cary, NC.; P. Hauck, Mount Sinai School of Medicine, New York, NY.

10:30 a.m.
Control of Legionella Growth in Distribution Systems. (1) E. Dahlen, ChemRisk Inc., San Francisco, CA.

10:50 a.m.
Discovery of Legionella in Potable Water Distribution System: Follow-Up Investigation and Remediation. (2) M. Gillie, GeoTrans Inc., King of Prussia, PA.

11:10 a.m.
Managing Risk of Waterborne Pathogens in Building Water Systems. (3) M. Freije, HC Information Resources Inc., Fallbrook, CA.

11:30 a.m.
Control of Emissions From a Sewage Sludge Pelletizing Facility Located in an Urban Environment. (4) P. Morey, Air Quality Sciences Inc, Atlanta, GA.

11:50 a.m.
The Use of UV in Lieu of Chemical Fumigants for Disinfecting HEPA Filters. (5) J. Kwan, S. Yu, P. Yue, Hong Kong University of Science and Technology, Kowloon, Hong Kong Special Administrative Region of China.

12:10 p.m.
Rapid On-Site Detection of Aspergillus Using an Electrochemical Based Microarray Detector. (6) M. Mathews, L. Williams, M. Frasier, P. Williams, AnzenBio, Salt Lake City, UT.

RT
201

New Innovations in Exposure Risk Management: Optimizing the Efficiency and Effectiveness of Our Strategies

ROUNDTABLE 201
10:30 a.m.–12:30 p.m.

Arranger: J. Mulhausen, 3M Company, St. Paul, MN. Moderator: R. Goldman, 3M Company, St. Paul, MN. Monitors: A. Lori, 3M Company, St. Paul, MN.; N. Wong, 3M Company, St. Paul, MN.

Innovative tools such as probabilistic computer modeling and Bayesian statistical techniques offer a tremendous opportunity for optimizing exposure risk management strategies. They are both effective at identifying and protecting unacceptably exposed employees and are both efficient in terms of the resources needed for implementation. These exciting tools can be used to optimize strategy effectiveness and efficiency at both the operation and the enterprise level. Presenters in this roundtable will examine the benefits of optimizing the performance of exposure risk management strategies, discuss new innovations in tools that enable an optimized approach, and review a case study involving the development of one enterprise-wide approach.

  • Optimizing the Effectiveness and Efficiency of Our Exposure Risk Management Strategies: Overview and Benefits. J. Mulhausen, 3M Company, St. Paul, MN.
  • Properly Interpreted Industrial Hygiene Data in an Exposure Assessment Process: Why a Performance-Based Approach Is Needed. T. Lane, Merck & Company, Inc., Whitehouse Station, NJ.
  • Innovative Tools for Understanding the Overall Performance of Your Exposure Risk Management Strategy. P. Hewett, Exposure Assessment Solutions Inc., Morgantown, WV.
  • One Company's Approach to Defining a Performance-Based Exposure Risk Management Strategy. P. Logan, 3M Company, St. Paul, MN.

RT
202

So, Now You Are the Safety Manager―Fundamentals for the Industrial Hygienist

ROUNDTABLE  202
10:30 a.m.–12:30 p.m.

Arranger: L. Sedlak, Black & Decker, Hardware & Home Improvement, Foothill Ranch, CA. Moderator: N. Orr, BD, Franklin Lakes, NJ. Monitors: S. Shattuck, Southern California Gas Company, Los Angeles, CA.; K. Lavaty, Earth & Environmental, Portland, OR.

Doing "more with less" has become the theme of today's world. The challenges facing industrial hygienists, whether working for one employer with multiple locations or consulting to multiple clients, are the same. The focus of this roundtable will be to introduce you to the tools available to the Safety professional as you assume responsibility for your new role.

  • Understanding the Pitfalls and Advantages of Assuming the Safety Responsibility. D. Napier, Dan Napier & Associates—DNA, Studio City, CA.
  • Key Risk Reduction Processes. J. Ingram, Clorox Company, Pleasanton, CA.
  • Legal and Regulatory Issues. T. Thedell, Sempra Energy, San Diego, CA.

RT
203

Case Fatalities After Exposure to Welding, Organic Dust, and Hydrogen Sulfide

ROUNDTABLE 203
10:30 a.m.–12:30 p.m.

Arranger: R. McCully, U.S. DOL/OSHA, Washington, DC. Moderator: A. Longmire, U.S. DOL/OSHA, Washington, DC. Monitors: D. Wright, U.S. DOL/OSHA, Washington, DC.; R. McCully, U.S. DOL/OSHA, Washington DC, DC; H. Cole, U.S. DOL/OSHA, Washington, DC.

The OSHA Office of Occupational Medicine, a division of the OSHA Directorate of Science, Technology, and Medicine, provides medical consultation to OSHA compliance officers. At this roundtable, medical officers of the OSHA Office of Occupational Medicine will discuss the recent medical consultations for OSHA inspections that they consider to be the most interesting.

  • Evaluation of Bacillus Cereus Pneumonia in a Welder. A. Longmire, U.S.DOL/OSHA, Washington, DC.
  • Evaluation of Hypersensitivity Pneumonitis in a Corn Harvesting Worker. P. Bray, U.S. DOL/OSHA, Washington, DC.
  • Evaluation of Death in a Farm Worker Exposed to Hydrogen Sulfide. J. Piacentino, U.S. DOL/OSHA, Washington, DC.

RT
204

Selection and Use of NIOSH Approved CBRN Respirators

ROUNDTABLE 204
10:30 a.m.–12:30 p.m.

Arranger: Z. Zhuang, NIOSH, Pittsburgh, PA. Moderator: L. Boord, NIOSH, Pittsburgh, PA. Monitors: P. Kelly, Calpine Corporation, Santa Rosa, CA.; R. Jennings, Alcoa Corp., Pittsburgh, PA.

Recent terrorist events in the United States underscore the importance of emergency response procedures for dealing with terrorist-related events involving chemical, biological, radiological, or nuclear agents. This certainly includes the need for respirators approved by the National Institute for Occupational Safety and Health for the expected hazards. The NIOSH National Personal Protective Technology Laboratory has integrated applicable industrial and military technologies to provide the full range of protection needed by responders. Specific CBRN standards have been developed for four classes of respirators: (1) self-contained breathing apparatus; (2) air-purifying (full-facepiece) respirators; (3) air-purifying escape respirators; and (4) self-contained escape respirators. NIOSH approvals have been granted to SCBA and APR manufacturers. NIOSH testing and evaluation of escape respirators for approval is in process. Panelists on this roundtable will discuss the CBRN respirator standards development processes, CBRN respirators selection matrix, and use guidance. The overall objective is to provide the practicing hygienists with an understanding to the appropriate respiratory protection for emergency responders.

  • CBRN Respirator Standards Development Processes. J. Szalajda, NIOSH, Pittsburgh, PA.
  • CBRN Respirators Selection Matrix. K. Motley, U.S. DOL/OSHA, Salt Lake City, UT.
  • Performance and Use of CBRN SCBA Respirators. Z. Frund, MSA Company, Cranberry Township, PA.
  • Performance and Use of CBRN APR Respirators. C. Colton, 3M Company, St. Paul, MN.

LECTURE

Jeffrey S. Lee Lecture
A Tribute to Jeff Lee―A True Giant in the Occupational Hygiene Profession

12:30 p.m.–1:30 p.m.

Monitor: L.Renton, WESA, Carp (Ottawa), ON, Canada.

Ernest Mastromatteo, CD, MD, DPH, DIH, FABPM (Occ. Med.), CCBOM, MFOM (London)Ernest Mastromatteo, CD, MD, DPH, DIH, FABPM (Occ. Med.), CCBOM, MFOM (London), Consultant, Toronto, ON, Canada.

Dr. Mastromatteo, a consultant in Occupational and Environmental Health, received his medical degree (1947), and diplomas in Public Health (1950) and Industrial Health (1958) from the University of Toronto. He is certified by the American Board of Preventive Medicine by Examination; the Canadian Board of Occupational Medicine by Examination; and is a member through distinction of the Faculty of Occupational Medicine London.

Dr. Mastromatteo has spent many years teaching occupational and environmental health. He currently serves as an emeritus member of ACGIH®'s Threshold Limit Values for Chemical Substances (TLV®-CS) Committee. He was also a member and Chair of the Ontario Medical Association's Committee on Public Health and Section on Occupational Health, and is a member of the Canadian Medical Association's Committee on Occupational and Environmental Health. Dr. Mastromatteo served as President of the Ontario Thoracic Society from 1966 through 1968. He has served as Trustee and Board Member of the American Board of Preventive Medicine's Occupational Medicine Subcommittee; as an elected member of the Ramazzini Medical Society; as a member of the International Commission on Occupational Health; and as a member of the Medical Directors' Forum.

Dr. Mastromatteo will be awarded ACGIH®'s Steiger Award at the Opening Session of this conference and has received ACGIH®'s Stokinger Award for scientific contributions to occupational toxicology in 1981, among numerous other honors and awards throughout his professional career. He has authored 45 publications on occupational health, toxicology, and environmental health, four book chapters, and has served as an editorial committee member for two books.

Dr. Mastromatteo's lecture will focus on his memories of Dr. Lee and Dr. Lee's accomplishments, as well as his own experiences during his 50 years in the field of occupational health.

 

CR
306

Preventing Fatalities: Highlighting High-Risk Operations at Your Sites

EHS CROSSOVER PROGRAM  306
2:00 p.m.–3:30 p.m.

Moderator: M. Ferrell, U.S. DOL/OSHA, Houston, TX Monitors: S. Fess, Xerox Corporation, Webster, NY; B. Pope, Valero Refining Company, Houston, TX. Presenter:  C. Shields, U.S. DOL/OSHA, North Aurora, IL.

This presentation gives the safety and health professional practical information for the prevention of workplace fatalities at their sites. Commonplace hazards causing fatalities were identified in an analysis of seven years of OSHA fatality investigations in Illinois. Through case studies and photos from these 1997–2003 OSHA files, this presentation will give you insights and training nuggets for operations and hazards in your own facility.

Presentation Objectives:

  • Knowledge of fatality trends based on Illinois data
  • Knowledge of common high risk operations using case studies
  • Controls for operations covered in the case studies

PO
102

Lead

PODIUM 102
2:00 p.m.–4:20 p.m.

Arranger: K. White, Virginia Beach, VA. Moderator: L. Pierce, Fiberquant, Phoenix, AZ. Monitors: D. Sandusky, Forensic Analytical, Hayward, CA.; L. McMahon, Novi, MI.

2:00 p.m.
Factors That Influence Residential Lead and Total Particle Infiltration at the Tar Creek Superfund Site. (7) M. Phillips, R. Graff, R. Lynch, D. Johnson, University of Oklahoma, Oklahoma City, OK.

2:20 p.m.
HUD Lead Program Update. (9) W. Friedman, U.S. HUD, Washington, DC.

2:40 p.m.
Housing Surveys and Childhood Lead Poisoning: Comparison of Retrospective and Projected Trends Between 1990 and 2009. (10) D. Jacobs, U.S. HUD, Washington, DC.

3:00 p.m.
Child Lead Issues in Non Regulated Buildings. (11) V. Belfit, U.S. Army CHPPM, Bel Air, MD.

3:20 p.m.
Objective Comparison of Wipe Sampling Media for Determining Lead on Hands. (12) M. Boeniger, NIOSH/CDC, Cincinnati, OH.

3:40 p.m.
A Comparison of X-Ray Fluorescence and Wet Chemical Analysis of Air Filter Samples From a Bronze Foundry. (13) M. Harper, B. Pacolay, NIOSH/HELD/EAB, Morgantown, WV; M. Andrew, NIOSH/HELD/BB, Morgantown, WV.

PO
103

Health Care Industries

PODIUM 103
2:00 p.m.–4:40 p.m.

Arranger: T. Seitz, NIOSH/CDC, Cincinnati, OH. Moderator: G. Byrns, Illinois State University, Normal, IL. Monitors: G. Burr, NIOSH, Cincinnati, OH.; T. Seitz, NIOSH/CDC, Cincinnati, OH.

2:00 p.m.
Occupational Exposure to Dimethyl Sulfide in the Health Care Setting. (14) T. Fuller, Boston University Medical Center, Boston, MA; S. Bloom, Brigham and Women's Hospital, Boston, MA.

2:20 p.m.
Developments in Bloodborne Pathogens Safety: An OSHA Update. (15) D. Williams, U.S. DOL/OSHA, Washington, DC.

2:40 p.m.
Does the 2004 TLV® for Natural Rubber Latex Offer Adequate Protection to Health Care Workers? (16) C. Hon, L. Bennett, Vancouver Coastal Health, Vancouver, BC, Canada; Q. Danyluk, Fraser Health, Vancouver, BC, Canada.

3:00 p.m.
Field Trails of Novel Local Exhaust Ventilation Devices for Control of Bioaerosols Released From Patients With Respiratory Infection. (17) S. Yu, J. Kwan, Hong Kong University of Science and Technology, Kowloon, Hong Kong Special Administrative Region of China.

3:20 p.m.
Role of Industrial Hygiene in Meeting the USP 797 Standard. (18) H. Bhattacharjee, F. Melnick, RJ Lee Group Inc., New York, NY.

3:40 p.m.
Control of Airborne Contaminants During Construction Activities in Health Care Facilities. (19) D. Regelbrugge, R. Rottersman, G. Crawford, Boelter & Yates Inc., Park Ridge, IL.

4:00 p.m.
Rapid, Economical, and Population-Protective Monitoring of Mold Disturbance in Hospitals. (20) D. Kahane, D. Cox, J. Martinelli, M. Piercey, Forensic Analytical, Hayward, CA.

4:20 p.m.
Development of a Test Drill for Assessing Physical Work Capacity of Paramedics. (21) P. Vehmasvaara, South Carelia Polytechnic, Lappeenranta, Finland; V. Louhevaara, University of Kuopio and Finnish Institute of Occupational Health, Kuopio, Finland.

PO
104

Mold Exposure Assessment and Evaluation

PODIUM 104
2:00 p.m.–5:40 p.m.

Arrangers: N. Zimmerman, Purdue University, W. Lafayette, IN; L. Albin, Purdue University, West Lafayette, IN.  Moderator: L. Albin, Purdue University, West Lafayette, IN. Monitors: G. Cormier, Occupational Risk Control Services Inc., New Britain, CT.; A. Port, OES Consultants, Scotch Plains, NJ.

2:00 p.m.
Culturable Fungi in Settled Dust From Normal Residential Environments. (22) J. Hicks, E. Lu, Exponent Inc., Oakland, CA.

2:20 p.m.
Numerical Guidelines for Total Fungi in Carpet Dust for IICRC Conditions 1
3. (23) D. Bridge, Rimkus Consulting Group Inc., Houston, TX; M. Krotenberg, Rimkus Consulting Group Inc., Phoenix, AZ.

2:40 p.m.
Detection of Indoor Airborne Fungal Contamination Through Examination of Building Heating, Ventilating and Air Conditioning (HVAC) Filters. (24) H. Perez, Drexel University, Philadelphia, PA; N. Zimmerman, Purdue University, West Lafayette, IN.

3:00 p.m.
Indoor Environmental Quality (IEQ): A 10-Year Case Study for Industry IEQ Guidelines. (25) E. Ziegler, R. Sahay, Pure Air Control Services, Clearwater, FL.

3:20 p.m.
A Method for Interpreting Airborne Concentrations of Mold. (26) J. Spurgeon, Bayshore Environmental Inc., Placentia, CA.

3:40 p.m.
Evaluating Airborne Culturable Fungal Concentrations on Wide-Body Commercial Passenger Aircraft. (27) L. Taylor, CDC/NIOSH/ Harvard University, Cincinnati, OH; M. Hein, K. Wallingford, CDC/NIOSH, Cincinnati, OH.

4:00 p.m.
The Effect of Disturbing Colonized Mold on Airborne Spore Concentrations. (28) S. Evans, MDE Inc., Seattle, WA.

4:20 p.m.
Invasive and Non-Invasive Investigation Techniques for Mold Infected Wall Cavities. (29)  G. Crawford, D. Regelbrugge, F. Norlock, J. Ruhl, Boelter & Yates Inc., Park Ridge, IL; C. Yang, P&K Microbology Services Inc., Cherry Hill, NJ.

4:40 p.m.
Interpretation of South Texas Airborne Fungi Data. (30) S. Hays, Gobbell Hays Partners, Inc., Nashville, TN; S. Kenoyer, Gobbell Hays Partners Inc., San Antonio, TX.

5:00 p.m.
Regional and Seasonal Fungal Variability in the Continental United States From Spore Trap Analysis. (31) B. Cortes, EMSL Analytical Inc., Orlando, FL.

5:20 p.m.
Indoor Air Quality in a South Central Kentucky School Part I: Comfort Parameters and Carbon Dioxide. (32) E. Iyiegbuniwe, M. Rodriguez, Western Kentucky University, Bowling Green, KY.

PO
105

Detection, Sampling, and Analysis for Gases, Vapors, and Aerosols

PODIUM 105
2:00 p.m.–6:00 p.m.

Arrangers: J. Kenoyer, Dade Moeller & Associates Inc., Richland, WA; B. Henderson, B.W. Technologies, Calgary, AB, Canada; G. Manning, Assay Technology. Pleasanton, CA. Moderators: J. Kenoyer, Dade Moeller & Associates Inc., Richland, WA; B. Henderson, B.W. Technologies, Calgary, AB, Canada; G. Manning, Assay Technology. Pleasanton, CA. Monitors: L. Monteith, University of Washington, Seattle, WA.; P. Subramanian, II TRI-NECDF, South Newport, IN.

2:00 p.m.
Comparison of Particle Size Distributions From Six Types of Aerosol Samplers. (33) J. Park, J. Rock, C. Parnell, Texas A&M University, College Station, TX.

2:20 p.m.
A Comparative Analysis of Performance of Aerosol Samplers Under Field Conditions for Capturing Respirable and Thoracic Dust. (34) K. Hopp, S. Erdal, L. Brown-Ellington, T. Schoonover, L. Conroy, University of Illinois at Chicago, Chicago, IL.

2:40 p.m.
Field Infrared Detection Enhanced With Solid Phase Concentration. (35) C. Bryant, P. LaPuma,
Uniformed Services University of the Health Sciences, Bethesda, MD.

3:00 p.m.
Comparison of New Mercury Vapor Analyzer Performance. (36) W. Raisanen, Reliable Instruments LLC, Washington, PA.

3:20 p.m.
Use of Portable X-Ray Fluorescence (PXRF) in Monitoring Arsenic Exposure During the Preventive Maintenance Task in the Microelectronic Industry. (37) Y. Hwang, W. Chu, National Taiwan University, Taipei, Taiwan Republic of China; T. Shi, D. Taung, Y. Hsiou, C. Chen, Institute of Occupational Safety and Health, Taipei, Taiwan Republic of China.

3:40 p.m.
Feasibility Study for the Closed Cassette Extraction of IOM Sample Cassettes. (38) C. Herrman, Broadspire (NATLSCO Laboratory), Lake Zurich, IL.

4:00 p.m.
Workplace and Ambient Air Monitoring of Benzene and 1,3-Butadiene Using Diffusive Sampling and Automatic Thermal Desorption. (39) O. Nygren, A. Sunesson, M. Sundgren, National Institute for Working Life, Umea, Sweden.

4:20 p.m.
Determination of the Sampling Rate Variation for Assay Technology ChemDisk 571 Aldehyde Monitors, SKC UMEx 100 Passive Samplers, and Supelco DSD-DNPH Passive Samplers. (40) M. Eide, U.S. DOL/OSHA Salt Lake Technical Center, Sandy, UT.

4:40 p.m.
Diffusion Badges as a Long-term, Low-Level Method of Ambient Air Analysis. (41) K. Williams, Nova Research Inc., Alexandria, VA; S. Rose-Pehrsson, D. Kidwell, Naval Research Laboratory, Washington, DC.

5:00 p.m.
Passive Vapor Sampling and Concentration Modeling: Sampler and Method Development. (42) A. Brown, W. L. Gore & Associates Inc., San Francisco, CA;
J. Hodny, H. Anderson, II, W. L. Gore & Associates Inc., Elkton, MD.

5:20 p.m.
Determination of Hexamethylenetetramine in Air and Off-Gas Emissions From Industrial Processes. (43) C. Chan, CASSEN Testing Labs., Toronto, ON, Canada; D. Leong, Ontario Ministry of Labour, Toronto, ON, Canada.

5:40 p.m.
A Simpler, More Cost Effective Approach for Performing OSHA Method PV2120 Compliant Canister Sampling. (44) D. Cardin, C. Casteel, T. Robinson, Entech Instruments Inc., Simi Valley, CA.

RT
205

Government Affairs:
Joint Session ASSE and AIHA

ROUNDTABLE  205
2:00 p.m.–3:30 p.m.

The American Society of Safety Engineers and the American Industrial Hygiene Association recently affirmed a memorandum of understanding between the two organizations designed to promote communication, understanding and cooperation on matters of mutual interest. Pursuant to that memorandum ASSE and AIHA government affairs program representatives will conduct a joint session to provide insight on the similarities and differences of the two organizations' government affairs programs including regulatory issues, policies, and initiatives.

  • D. Heidorn, American Society of Safety Engineers, Des Plaines, IL
  • A. Trippler, American Industrial Hygiene Association, Fairfax, VA

RT
206

Frugal Ergonomics: The Next Generation

ROUNDTABLE 206
2:00 p.m.–4:30 p.m.

Arranger: S. Tooley, The Boeing Company, Seattle. Moderator: S. Tooley, The Boeing Company, Seattle, WA. Monitors: K. Davis, University of Cincinnati, Cincinnati, OH.; B. Diest, QVC, Inc., West Chester, PA.

One of the major hurdles for most ergonomics professionals is to convince management to invest resources into make changes within their work environments. Selling ergonomic improvements to upper management in most companies requires a solid return on investment (ROI) in addition to showing reduction in risk and injuries. Upper management perceives ergonomic solutions to be expensive. This roundtable will discuss inexpensive and innovative ergonomic solutions that have been implemented in different manufacturing industries that have not only resulted in cost savings and avoidance, but have also resulted in reductions in lost workday case rates. Frugal engineers and ergonomist combine rather unorthodox manufacturing methods, ergonomics and lean production ideals to accomplish rather fantastic results. Frugal however, does not always mean cheap, but it is the best use of the resources and materials available. A number of problems and improvements are presented with unique solutions based on "outside the industry thinking." See how simple, "frugal" solutions make improvements to manufacturing operations.

  • The Frugal Engineer―Continued. L. Walsh, Pratt and Whitney, East Hartford, CT.
  • Simple Solutions for Ergonomic Problems. L. Nystrom, DuPont, Wilmington, DE.
  • More Shoestring Ergonomics. B. Snow, The Boeing Company, Wichita, KS.
  • Cost Effective Ergonomic Improvements. M. Joshi, The Raytheon Company, Plano, TX.
  • More "Moonshine" and Ergonomics: For What Ails You. A. May, The Boeing Company, Seattle, WA.

RT
207

Hot Topics in Nonionizing Radiation

ROUNDTABLE 207
2:00 p.m.–4:30 p.m.

Arranger: M. Phillips, University of Oklahoma, Oklahoma City, OK. Moderator: F. Akbar-Khanzadeh, Medical College of Ohio, Toledo, OH. Monitors: B. Pathak, Canadian Centre for Occupational Health and Safety, Hamilton, ON, Canada; S. Hemperly, Hitachi Global Storage Technologies, San Jose, CA.

Innovation in uses of nonionizing radiation (NIR) and assimilation of new knowledge and guidelines for protection against NIR hazards pose a continuing challenge for environmental health and safety professionals. This roundtable will address new issues at the cutting edge of NIR technology as well as ongoing concerns about widespread occupational exposure to solar ultraviolet radiation, a known NIR carcinogen.

  • Solar Ultraviolet Radiation Exposure of the Outdoor Worker. D. Contreras, U.S. Army CHPPM, Aberdeen Proving Ground, MD.
  • The Final Frontier: Free Space Lasing and Beyond. C. Ficklen, Mainthia Technologies Inc., Hampton, VA.
  • Is Your Radio Frequency Safety Program Up-to-Date? R. Johnson, L-3 Communications, Narda-East, Hauppauge, NY.
  • Electromagnetic Field Exposure from Canine Fences. T. Fuller, Boston University Medical Center, Boston, MA.
  • Radio Frequency Energy (RFE) and Homeland Security. J. Leonowich, Pacific Northwest National Laboratory, Richland, WA.

RT
208

Chemicals of Controversy

ROUNDTABLE 208
2:00 p.m.–4:30 p.m.

Arranger: T. Knudson, Brush Wellman Inc., Cleveland, OH. Moderator: K. Fischer, Horne Engineering Services Inc., Falls Church, VA. Monitors: R. Chan, James Hardie Building Products, Fontana, CA.; R. Barr, Alcoa Corporate Center, Pittsburgh, PA.

The purpose is to engage the audience in lively discussion on risk management techniques used to control health, legal, and public perception risks of controversial hazardous chemicals. The objective is to identify opportunities for industrial hygienists broaden their value to their organization by bridging the gaps between scientific, business, legal, and social interests. Four case studies will be presented pertaining to specific chemical substances currently undergoing scientific scrutiny regarding a change in the health hazard assessments.

  • Silica―The Challenge: Toxicology, Detectability, and Control Feasibility. M. Flanagan, University of Washington, Seattle, WA.
  • Beryllium Product Stewardship. M. Kolanz, Brush Wellman Inc., Cleveland, OH.
  • Manganese and Welding Fumes. M. Harris, Hamlin & Harris Inc., Baton Rouge, LA.
  • Endocrime Disrupters. T. Schettler, Science and Environmental Health Network, Newburyport, MA.

RT
209

Criminalizing Corporations―Implications for the Hygiene Profession in Canada

ROUNDTABLE 209
2:00 p.m.–4:30 p.m.

Arranger: U. Bickis, Phoenix OHC Inc., Kingston, ON, Canada. Moderator: L. Renton, WESA, Carp (Ottawa), ON, Canada. Monitors: L. Hong, CCOHS, Hamilton, ON, Canada.; J. Lesage, IRSST, Montreal, PQ, Canada.

Canadian Criminal Code amendments made in 2004 to ensure that "employers are held fully accountable for safe work environments," rendered organizations responsible for the negligent acts or omissions of their representative(s). Consequently, corporate entities, their officers, and supervisors may be criminally liable, in the case of departure from the expected standard of care. This change occurred consequently to the Westray explosion (killing miners who knew that they were working under unsafe conditions, but driven by financial circumstances and management practices to continue), which the official inquiry described as "... a complex mosaic of actions, omissions, mistakes, incompetence, apathy, cynicism, stupidity, and neglect." But, no one was found culpable by the courts. There is increased interest at all corporate levels in "due diligence" i.e. doing what is reasonable to protect worker health and safety. In the case which entrenched this concept in the Canadian legal arena the prosecution rested (in part) on the fact that contractor cost (and not qualifications) was an over-riding consideration. The first criminal prosecution under the Criminal Code amendment has been launched, in relation to a fatality that occurred less than a month after it came into effect. This case is, of course, of great interest with respect to precedent. This session will explore the implications and impact of this changed statutory climate on the practice of hygiene in Canada. Although employers have been protected from civil suits by Workers' Compensation legislation, will the prospect of prosecution lead to more attention to the prevention of disease? Will employers feel more compelled to engage the services of only those practitioners with demonstrable accreditation? Will there be an effort on the part of employers to reduce "paper/electron trails"? Will it lead to broad out-sourcing of hygiene services, in an attempt to take these out from under the corporate umbrella? How will the practitioner need to adjust? Will there be an increase in those undertaking the CRBOH accreditation process? Will the CRBOH process need to change? Will this amendment effect inter-jurisdictional setting of OELs? What will be the overall effect on worker health protection?

  • The Institutional Sector. R. Hamilton, Ottawa Hospital, Ottawa, ON, Canada.
  • The Service Sector. M. Crepeau, Serco Facilities Management Inc., Ottawa, ON, Canada.
  • The Manufacturing Sector. J. Owens, Teck Cominco Metals Ltd, Trail, BC, Canada.
  • A Regulatory Perspective. N. Harwood, Workers Compensation Board of British Columbia, Vancouver, BC, Canada.
  • Professional Impacts and Opportunities. U. Bickis, Phoenix OHC, Inc., Kingston, ON, Canada.

RT
210

Challenges of Global Implementation of Comprehensive Exposure Assessment

ROUNDTABLE 210
2:00 p.m.–5:00 p.m.

Arranger: T. Johnson, 3M, St. Paul, MN. Moderator: J. Mulhausen, 3M, St. Paul, MN. Monitors: N. Wong, 3M, St. Paul, MN.; H. Harapan, 3M, St. Paul, MN.

Implementation of a comprehensive exposure assessment and management system within a global business presents challenges and opportunities in different regions of the world. The roundtable will describe benefits and challenges with respect to implementation at the manufacturing level in Canada, EU, Latin America, and Asia Pacific regions. Various local and regional regulatory, historical, political, and cultural issues related to implementation of a global exposure assessment program will be addressed by region. In addition, specific exposure assessment program implementation challenges posed by the company's global pharmaceutical manufacturing business will be discussed.

  • Overview of Comprehensive Exposure Assessment and Management Program and Systems. M. Sheppard, 3M, London, ON, Canada.
  • Canadian Regulatory Aspects of Comprehensive Exposure Assessment and Management Systems. H. Ladanchuk, 3M, London, ON, Canada.
  • Implementation Challenges and Rewards in Asia Pacific. T. Johnson, 3M, St. Paul, MN.
  • Implementation Challenges and Rewards in Brazil. J. Dias, 3M, 13181-900 Sumare, Brazil.
  • European Occupational Hygiene Requirements and Opportunities Related to Implementation. P. Logan, 3M, St. Paul, MN.
  • Development and Integration of a Global Exposure Assessment System into Pharmaceutical Development and Manufacturing. A. Lori, 3M, St. Paul, MN.

RT
211

OSHA Regulatory Update for the Construction Industry

ROUNDTABLE 211
2:00 p.m.–5:00 p.m.

Arranger: D. Krupinski, U.S. DOL/OSHA, Washington, DC. Moderator: J. Keyes, CHESS Inc., Woodbury, MN. Monitors: D. Krupinski, U.S. DOL/OSHA, Washington, DC.; J. Capriotti, U.S. DOL/OSHA, Washington, DC.

OSHA has been working on developing or updating some major construction industry standards. This roundtable will provide viewpoints from OSHA staff on the highlights and challenges of developing these safety and health regulations for the construction industry. The presenters will also discuss how OSHA envisions these standards may be implemented. OSHA staff will provide updates on the following topics: hexavalent chromium, crane and derrick, hearing conservation, respirable crystalline silica, confined space, power transmission, and distribution. Participants will be encouraged to ask questions and share their experiences in implementing control measures in these areas.

  • Hexavalent Chromium. W. Perry, U.S. DOL/OSHA, Washington, DC.
  • Crane and Derrick. T. Cordaro, U.S. DOL/OSHA, Washington, DC.
  • Hearing Conservation. M. Seymour, U.S. DOL/OSHA, Washington, DC.
  • Respirable Crystalline Silica. W. Perry, U.S. DOL/OSHA, Washington, DC.
  • Confined Space. T. Cordaro, U.S. DOL/OSHA, Washington, DC.
  • Power Transmission and Distribution. M. Seymour, U.S. DOL/OSHA, Washington, DC.

RT
212

Alternative Methods to Reach Hispanic Workers

ROUNDTABLE 212
2:00 p.m.–5:00 p.m.

Arranger: Z. Haslam Jr,, Duke Energy, Charlotte, NC. Moderator: Z. Haslam Jr., Duke Energy, Charlotte, NC. Monitors: K. Blondin, U.S. GSA, Washington, DC.; H. Miller, U.S. DOL/OSHA, Fort Lauderdale, FL.

The most recent data from the Bureau of Labor Statistics continue to show a disproportionately high number of fatalities among Latino workers. While Latinos make up 11% of the workforce in the United States, they accounted for 15% of workplace fatalities in 2002. The number of Latinos in the workforce is projected to continue on an upward trend, increasing by one-third over the next 10 years. These statistics suggest health and safety professionals must be more effective in reducing occupational health risks among the Latino workforce. The roundtable panel will present results of research conducted on injury and illness rates, and fatality rates of Hispanic workers in the construction industry in the United States. Panelists will also share alternative methods for reaching these workers and reducing the number of workplace injuries and illnesses. Roundtable attendees will be introduced to customized, interactive health and safety training applications, community-based outreach efforts, and a risk communication and intervention study aimed at reducing the health and safety risks among Hispanic workers.

  • Health and Safety Research and Training for Hispanic Workers in Construction. D. Ellenberger, The Center to Protect Workers' Right, Silver Spring, MD.
  • Approaches to Improve Risk Communications With Hispanic Workers in Auto Body Shops. Y. Liu, Yale University, New Haven, CT.
  • LOSH Training: Flexible Delivery Models Serving Frontline Monolingual Spanish-Speaking Workers in Southern California. E. Ramirios, UCLA, Los Angeles, CA.
  • NIOSH Health Hazard Evaluations as a Means of Reducing Hispanic Workers Injuries and Illnesses. M. Rodriguez, NIOSH, Cincinnati, OH.
  • Occupational Safety and Health Hazards Encountered by Latino Immigrant Workers in California: Understanding the Causes of Serious Injuries, Accidents, and Illnesses in Construction and Agriculture. L. Mireles, CAL-OSHA, San Diego, CA.

RT
213

Industrial Hygienists Prepare for Disasters

ROUNDTABLE  213
2:00 p.m.–5:30 p.m.

Arrangers: L. Wong, University of California–San Francisco, San Francisco, CA.; E. Aton, Saint Louis City LEPC, Saint Louis, MO. Moderator: D. Bryant, Central Missouri State University, Warrensburg, MO. Monitors: C. Marlowe, Camp Dresser & McKee, Edison, NJ.; J. Earley, Rio Hondo Community College, Covina, CA.

In today's atmosphere of increased awareness and preparation for disasters and terrorism, industrial hygienists must play a major role in emergency preparedness, response and recovery activities in the areas of emergency preparedness, hazard assessment, selection of personal protective equipment, and controlling exposures to first responders and the general public. In addition, industrial hygienists can provide valuable support for medical response systems for planning and responding to catastrophic events, such as receipt of secondary victims of mass casualties, decontamination, and hazard assessment. This roundtable will present examples of industrial hygienists who are providing technical expertise essential in emergency preparedness and response: The Local Emergency Planning Committee (LEPC); Regional Medical Response Systems; and working with federal, state, and local government in planning and preparedness for mass casualties from possible bioterrorism activities. Industrial hygienists may provide support either as volunteers, in community service, or as part of the industrial hygienist's normal job duties. The roundtable will conclude with tools, references, and resources that should fill the industrial hygienist's "toolbox" if they want to become involved in the disaster management arena. Since many of these applications go beyond the traditional workplace environment, industrial hygienists need to acquire new terminology and rethink their roles to be proficient at utilizing these new tools.

  • Planning for the BIG ONE: A LEPC and Fire Department Perspective. S. Tsumura, El Segundo Fire Department, El Segundo, CA.
  • Role of Environmental and Occupational Health and Safety Specialists in a Regional Medical Response System. M. Bisesi, Medical College of Ohio, Toledo, OH.
  • Regional Emergency Response Planning―Rural Medical Perspective. M. Kendig, Mayo Clinic, Rochester, MN.
  • How to Select the Proper PPE for Emergencies. D. Groce, Best Manufacturing Company, Menlo, GA.
  • The Role of the Industrial Hygienist in Public Sector Emergency Planning. L. Aton, St. Louis City Local Emergency Planning Commission, Saint Louis, MO.
  • The Department of Homeland Security and HHS Health Information Sharing and Analysis Committee/Occupational Health Coordinating Group, a Vital New Resource for EHS Professionals for Emergency Preparedness and Response. J. Meagher, INTERCET Ltd., McLean, VA.

RT
248

LATE BREAKING SESSION
2005 Tsunami in Southeast Asia: Occupational Health and Safety Response to an Unprecedented Multinational Disaster

ROUNDTABLE  248
2:00 p.m.–5:30 p.m.

Arranger and Moderator: M. Kiefer, NIOSH/CDC, Atlanta, GA. Monitors: V. Rodriguez, Ligand Pharmaceuticals Inc., San Diego, CA; G. Popov, Kingston Environmental Services Inc., Kansas City, MO; J. Springston, Sandler Occupational Medicine Associates, Glen Head, NY.

In the aftermath of the December 2004 tsunami in Asia, significant occupational health and safety issues emerged that required urgent attention. Several groups were deployed either in rapid assessment or coordinating teams to evaluate occupational hazards and safety risks in the affected regions. Through their technical capacity and staff support, they were able to make significant impact on identified problems, as well as partner with international groups and agencies, trade associations, and workers' and employers' organizations. This roundtable will describe efforts undertaken to identify pressing occupational health and safety concerns in the midst of this calamity and innovative methods that provided direct assistance to those in need. Roundtable participants will discuss field experiences. This session will provide a framework to enhance the ability of the occupational safety and health community to work more closely in future events.

  • AIHA International Affairs Committee Response to the Tsunami. S. Reynolds, Colorado State University, Ft. Collins, CO.
  • Engineering Evaluations of Health Care Facilities in Banda Aceh Following the Earthquake and Tsunami. M. Gressel, NIOSH, Cincinnati, OH and K. Kittusamy, NIOSH/CDC, Spokane, WA
  • The Occ/Env Emergency Operations Team: Co-Ordination, Activation, and Initiation in Response to the Tsunami. B. Bernard, NIOSH/CDC, Cincinnati, OH.
  • "Operation PPE"―An Indonesian Worker Success Story. J. Spahr, NIOSH, Morgantown, WV.
  • NIOSH OEH&S Response Following a Tide of Destruction: The Wat Yan Yao Mortuary and Phuket. E. Esswein, NIOSH, Denver, CO

CR
307

Recent Developments in Flash Fire Standards

EHS CROSSOVER PROGRAMS CR 307
4:00 p.m.–5:30 p.m.

This paper will discuss the new NFPA 2112 and NFPA 2113 standards as well as flame resistant fabrics and recent advances made in flash fire testing. Selection, care, proper use, and maintenance of PPE will also be discussed. Instrumented thermal manikin testing in simulated hydrocarbon flash fire events will be highlighted. Extensive video coverage, data, and post-exposure samples will be shown.

Moderator: C. Dellacqua, Calpine Corp, Folsom, CA. Monitor: A. Rengasamy, CDC/NIOSH, Pittsburgh, PA. D. Seiler, The DOW Chemical Corporation, Midland, MI. Presenters:  J.Moody, S. Margolin, Westex Inc., Chicago, IL.

Presentation Objectives:

  • Understand the flash fire hazard
  • Understand the uses and limitations of flame resistant clothing
  • Understand the contents of NFPA 2112 and NFPA 2113

 


AIHce logo
Cosponsored by AIHA and ACGIH

Last updated on May 19, 2005
© American Industrial Hygiene Association
2700 Prosperity Ave., Suite 250, Fairfax, VA 22031
(703) 849-8888; (703) 207-3561 fax