Introduction to Combustible Dust Hazards and Mitigation for IHs

Earn 2.0 CM Credit Hours/2.0 Contact Hours/0.2 COC

Combustible dust deflagrations are a process safety hazard not normally covered in Industrial Hygienist training. However, because OSHA is conducting Combustible Dust Inspections under its National Emphasis Program, it is likely that Industrial Hygienists will be involved in inspections or follow up or preparation to understand the potential hazards at their workplaces. This two-hour webinar will introduce the participant to the conditions necessary for a combustible dust deflagration, describe the standard laboratory tests that define the level of hazard, and review the common risk mitigation equipment and procedures used to minimize the risk of deflagrations. Videos will aid the participant in understanding the hazards and some of the equipment used to mitigate those hazards. It will also provide an overview of the National Fire Protection Association (NFPA) standards referenced in the OSHA National Emphasis Program.

Planning on Group Training with additional participants?
Please note AIHA's eLearning Program will require the submission of an online evaluation and $35 processing fee for any additional participant seeking credit.
Learning Outcomes
Upon completion, participants will be able to:
  • List the conditions necessary for both dust deflagrations and flash fires
  • Discuss the relative hazards of combustible dusts from laboratory test results
  • Identify common ignition hazards in a workplace and mitigation strategies
  • Outline the common failings of dust collection systems in preventing fugitive dust accumulations
  • Analyze the potential for a dust deflagration in process equipment and outline the generally available protective equipment to minimize or prevent the effects of a dust deflagration
  • Describe the procedures that need to be in place to support the protective equipment intended to minimize the dust deflagration hazard.

Presenter:  Gary Q. Johnson, P.E.

Gary helps clients find equipment and procedural solutions for workplace exposures. Gary has a Bachelor of Chemical Engineering from Ohio State University and an MBA from the University of Scranton. Working as an Industrial Ventilation and a Combustible Dust consultant for the last 11+ years, since leaving a 27 year Health, Safety, & Environment career at Procter & Gamble, he has helped clients in process industries such as paper, pharmaceuticals, bar soap, plastics compounding, plastic film, wood products, metal fabrication, foods and flavorings, combustible metal dusts, powder coating, and paint and coatings industries. He has also been active in technical training and as a member of technical committees.

He routinely presents Professional Development courses for the AIHce and local AIHA sections, webinars for Powder & Bulk Engineering Magazine, and teaches industrial ventilation courses for the North Carolina Industrial Ventilation Conference. He is also a regular speaker at the Powder and Bulk Solids conferences and OSHA Training Institute.  

He has published articles in several trade and technical publications. He recently joined the new ANSI/Z9.12 sub-committee writing a new national standard – “Combustible Dust Collection Systems” which will describe design and maintenance requirements for dust collection systems extracting combustible dusts.​

Important Certification Information
This Webinar will award CM credit hours, contact hours and COCs. CEU credits will not be awarded for participating in this webinar. The eLearning Program works with our accrediting bodies to insure compliance with all policies and (ANSI) standards. AIHA's eLearning Program requires any participant seeking CM credit hours, contact hours and COCs to submit a course evaluation.
 
Education Transcripts are updated continuously and available for download from AIHA’s website. Please allow 2-3 weeks after submitting an evaluation for education transcript processing. You will be notified by an automated email when your transcript is updated with course credit.
 
If you have further questions regarding course credit for participation, please feel free to contact us.