Learn proper risk assessment terminology, how to use internationally recognized risk assessment processes, and how to communicate results effectively.

This intermediate-level course includes an overview of fundamental EHS risk assessment concepts and internationally accepted risk assessment terminology.

A Modified Health Risk Rating (HRR) and IH Failure Mode and Effect Analysis methodology were developed for this course to explore exposure assessment priorities and health risk ratings. You will utilize several interactive IH risk assessment tools covering nanomaterials, additive or synergistic effects of multiple chemical exposures, and dermal exposure risk.

Additionally, a real-world case study will be used to demonstrate the alignment of occupational health risks and the Prevention through Design (PtD) risk assessment process.

At the end of this course, you will receive an assignment to select one of the risk assessment techniques covered and demonstrate a successful risk reduction methodology.

Agenda

This course is broken into four 2-hour sessions.

DateTimeHours
Monday, April 121:00 – 3:00 pm ET2 Contact Hours
Tuesday, April 131:00 – 3:00 pm ET2 Contact Hours
Wednesday, April 141:00 – 3:00 pm ET2 Contact Hours
Thursday, April 151:00 – 3:00 pm ET2 Contact Hours

Course Outcomes

Upon completion, students will be able to:

  • Discuss fundamental EHS risk assessment concepts.
  • Introduce industrial hygiene risk assessment techniques.
  • Utilize health risk assessments and prioritization.
  • Align occupational health risk alignment with the Prevention through Design (PtD) risk assessment process.
  • Apply the IH risk assessment model based on a real-world case study.

Who Will Benefit

This course is ideal for OEHS professionals who are interested in learning to use proper risk assessment terminology and internationally recognized risk assessment processes to develop risk reduction strategies.

Prerequisites

This course builds on the prior knowledge gained in the introductory risk assessment course.

Member $480 | Non-Member $580

Instructors

Georgi Popov, PhD, CSP, QEP, SMS, ARM, CMC, FAIHA
Professor, University of Central Missouri School of Geoscience, Physics, and Safety

Georgi Popov, PhD, CSP, QEP, SMS, ARM, CMC, FAIHA

Dr. Georgi Popov is a professor in the School of Geoscience, Physics, and Safety at the University of Central Missouri. He is a Certified Safety Professional (CSP), Qualified Environmental Professional (QEP) Safety Management Specialist (SMS), Associate in Risk Management (ARM), and a Certified Management Consultant (CMC). Georgi Popov received a PhD in Chemistry from the National Scientific Board and an M.S. in Engineering Physics from Defense University in Bulgaria. In 2001, Dr. Popov graduated from the Command and General Staff College in Ft. Leavenworth, Kansas. He also has a post-graduate certification in Environmental Air Quality. Dr. Popov is a recipient of the ASSP Global Safety Management, Executive Program in Safety Management and Risk Assessment Certificates.

John Arthur Lowe, CIH
Principal Technologist, Jacobs

John Arthur Lowe, CIH

Mr. Lowe is a Principal Technologist with Jacobs. Since 1979, he has practiced as an exposure scientist and environmental toxicologist with experience with assessing and controlling human health hazards throughout the lifecycles of chemical substances in the environment, for commercial, municipal, and Federal clients. Mr. Lowe has led numerous scientific studies for assessing environmental hazards including human health risk assessments, fate, and transport modeling, exposure modeling, and environmental monitoring studies. These have been applied to problems including hazardous waste site remediation, assessment and control of toxic air pollutant emissions, and product stewardship for pesticides and toxic substances. Mr. Lowe specializes in risk assessment and risk management for environmentally recalcitrant chemicals, including chlorinated solvents in soil and groundwater, dioxins and furans (D/Fs), polychlorinated biphenyls (PCBs), chlorinated pesticides, coal-tar residuals, per- and polyfluoroalkyl substances (PFAS), heavy metals, and arsenic.

Tsvetan Popov, PhD, CIH, CSP
Assistant Professor, University of Central Missouri School of Geoscience, Physics, and Safety

Tsvetan Popov, PhD, CIH, CSP

Dr. Tsvetan Popov is an assistant professor in the School of Geoscience, Physics, and Safety at the University of Central Missouri. He is a Certified Industrial Hygienist (CIH), and a Certified Safety Professional (CSP). In 2005, Tsvetan Popov received a PhD in Chemistry from the Defense Advanced Research Institute in Sofia, Bulgaria. In 2019 Tsvetan Popov graduated with a master’s degree in industrial hygiene from the University of Central Missouri.